Hi there,
As colder weather approaches, here’s a small job worth doing before putting your sprayer away. We checked DEWALT’s instruction manual for its 4-gal. cordless backpack sprayer and made the clean-down steps easy to scan below. We hope it helps you have the sprayer ready when you need it again.
1. Empty and rinse. Turn the sprayer OFF and remove the battery. Empty leftover chemical into a suitable container for later use, or dispose of it as the chemical manufacturer instructs. Thoroughly rinse and empty the tank with clean water until the chemical and residue are removed.
2. Flush the spray path. Add approximately 1 L of clean water to the tank. Install the battery, switch the sprayer ON, and run the water through the pump, hose, shut-off, wand and nozzle for at least 30 seconds. DEWALT notes that heavy use may also require soaking or gently brushing the nozzles.
3. Clear and dry. Empty remaining water from the tank, then keep spraying until water no longer comes out of the nozzle. Switch OFF, remove the battery, and squeeze the shut-off lever to release pressure in the hose. Remove the cap and filter basket; DEWALT recommends hanging the sprayer upside down to drain. Once dry, reinstall the basket and cap to keep debris out.
4. Store it above freezing. Keep the sprayer and battery indoors in a warm, dry place, away from direct sunlight, moisture and intense heat. DEWALT warns that water freezing inside the sprayer can damage components and void its warranty. For long battery storage, the manual recommends a fully charged pack in a cool, dry place outside the charger.
A quick safety note: Wear the PPE specified on the chemical label and Safety Data Sheet. Follow the full DEWALT manual, including its pressure-release and chemical-handling warnings.
Take care,
The Wise Line Tools team





